AKZO COATINGS -- PAINT MEDIUM BROWN 412-0114 L114 6AHK33453 -- 8010-01-344-5119 
=====================  Product Identification  =====================

Product ID:PAINT MEDIUM BROWN 412-0114 L114 6AHK33453
MSDS Date:09/01/1992
FSC:8010
NIIN:01-344-5119
Status Code:A
=== Responsible Party ===
Company Name:AKZO COATINGS
Address:1845 MAXWELL STREET
City:TROY
State:MI
ZIP:48084
Country:US
Info Phone Num:313-637-0400
Emergency Phone Num:(800)424-9300
Preparer's Name:HENRY SIMMONS
Chemtrec Ind/Phone:(800)424-9300
CAGE:2E800
=== Contractor Identification ===
Company Name:AKZO COATINGS
Address:1845 MAXWELL STREET
Box:City:TROY
State:MI
ZIP:48084
Country:US
Phone:313-637-0400
CAGE:2E800

=============  Composition/Information on Ingredients  =============

Ingred Name:ALIPHATIC HYDROCARBON SOLVENT
CAS:64741-41-9
< Wt:5.
OSHA PEL:500 PPM

Ingred Name:IRON OXIDE RED
CAS:1309-37-1
RTECS #:NO7400000
Minumum % Wt:10.
Maxumum % Wt:25.
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3;2 PPM

Ingred Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
< Wt:5.
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Ingred Name:LIGHT PETROLEUM DISTILLATE
CAS:64742-47-8
RTECS #:OA5504000
Minumum % Wt:5.
Maxumum % Wt:20.
OSHA PEL:400 PPM, 1600 MG/M3

Ingred Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
Minumum % Wt:25.
Maxumum % Wt:40.
OSHA PEL:2900 MG/M3;500 PPM
ACGIH TLV:525 MG/M3;100 PPM

=====================  Hazards Identification  =====================

Health Hazards Acute and Chronic:ACUTE: 1. EXCESSIVE VAPOR
    CONCENTRATION IN AIR, ESPECIALLY IN CONFINED SPACES, MAY CAUSE
    ASPHYXIATION. 2. EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL,
    THROAT, AND RESPIRATORY IRRITATION, DIZZINESS,  WEAKNESS, FATIGUE,
    NAUSEA, HEADACHE AND POSSIBLE UNCONCIOUSNESS. 3. SANDING DUST OR
    DRY SPRAY MAY CAUSE IRRITATION TO THE RESPIRATORY SYSTEM. 4. EYE
    CONTACT WITH LIQUID, VAPOR OR SPRAY MIST CAUSES IR RITATION,
    REDNESS, TEARING, BLURRED VISION, AND A SENSATION OF SEEING HALOS
    AROUND LIGHTS. 5. DRY DUST MAY CAUSE MECHANICAL EYE IRRITATION. 6.
    PROLONGED SKIN CONTACT MAY LEAD TO EXTRATION OF NATURAL O ILS WITH
    RESULTANT DRY SKIN, CRACKING.
Medical Cond Aggravated by Exposure:NONE EXPECTED.

=======================  First Aid Measures  =======================

First Aid:INHALATION: MOVE TO FRESH AIR, GIVE ARTIFICIAL RESPIRATION IF
    NECESSARY.	SKIN CONTACT: WASH WITH SOAP AND WATER. DO NOT ORGANIC
    SOLVENTS.  EYE CONTACT: FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
    CONSU LT A PHYSICIAN.  INGESTION: DRINK ONE OR TWO GLASSES OF WATER
    TO DILUTE. DO NOT INDUCE VOMITING. CONSULT A PHYSICIAN OR POISON
    CONTROL CENTER IMMEDIATELY. TREAT SYMPTOMATICALLY.

=====================  Fire Fighting Measures  =====================

Flash Point:=40.6C, 105.F
Lower Limits:0.6
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS ARE DESIRABLE.
    WATER SPRAY IS LESS EFFECTIVE.
Fire Fighting Procedures:WATER SHOULD BE USED TO COOL CONTAINERS
    EXPOSED TO FIRE. FIRE FIGHTING PERSONNEL SHOULD WEAR
    SELF-CONTAINING BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED, ISOLATE
    FROM HEAT, ELECTRICAL EQUIPMENT, SPARKS, AND OPEN FLAME. CLOSED
    CONTAINERS MAY EXPLODE WHEN EXPLODE WHEN EXPOSED TO EXTREME HEAT.
    APPLICATION TO HOT SURFACES RE QUIRES SPECIAL PRECAUTIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS, VENTILATE AREA, REMOVE WITH INERT ABSORBENT USING
    NON-SPARKING TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE CONTAINERS OUT OF SUN AND AWAY
    FROM HEAT, SPARKS AND OPEN FLAMES. STORE PLASTIC CONTAINERS OF
    FLAMMABLE LIQUIDS INSIDE CLOSED, APPROVED CONTAINERS OR SAFETY
    CABINETS. CLOSE ALL CONTAINERS AFTER  EACH USE. CONSULT NFPA AND
    LOCAL CODES FOR ADDITIONAL STORAGE REQUIREMENTS.
Other Precautions:DO NOT TAKE INTERNALLY. USE APPROVED BONDING AND
    GROUNDING PROCEDURE WHEN TRANSFERRING LIQUIDS. OBSERVE LABEL
    PRECAUTIONS. KEEP CLOSURES TIGHT AND CONTAINER UPRIGHT TO PREVENT
    LEAKAGE. NEVER USE PRESS URE TO EMPTY CONTAINER ? DRUM IS NOT A
    PRESSURE VESSEL. AVOID BREATHING SANDING DUST. DO NOT WELD OR 
    FLAME CUT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:ADEQUATE VENTILATION IS REQUIRED. USE NIOSH/MSHS
    APPROVES RESPIRATOR DEVICE. SEE YOUR SAFETY EQUIPMENT SUPPLIER FOR
    EVALUATION AND RECOMMENDATION. IN CONFINED AREAS USE NIOSH/MSHA
    APPROVED AIRLINE RES PIRATOR OR HOOD.
Ventilation:PROVIDE SUFFICIENT VENTILATION TO KEEP VAPOR CONCENTRATION
    BELOW THE GIVEN TLV AND PEL.
Protective Gloves:REQUIRED FOR PROLONGED OR REPEATED CONTACT.
Eye Protection:USE SAFETY EYE GOGGLES DESIGNED TO PROTECT AGAINST
    SPLASH OF LIQUIDS.
Other Protective Equipment:EYE AND BATH SHOWER SHOULD BE AVAILABLE. USE
    CHEMICAL RESISTANT APRON, BOOTS OR OTHER CLOTHING IF NEEDED TO
    AVOID REPEATED OR FREQUENT SKIN CONTACT. LIQUID MAY PENETRATE
    CLOTHING, SHOES AND LEATHER.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING, OR USING THE
    WASHROOM, LAUNDER CLOTHING BEFORE REUSE.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:=148.9C, 300.F
B.P. Text:300-490F
Spec Gravity:1.04
Percent Volatiles by Volume:55

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
    OXIDES OF NITROGEN AND SMOKE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
    AND LOCAL POLLUTION REQUIREMENTS RAGS, FILTERS, PAINT SUITS, EMPTY
    CANS, ETC., CONTAMINATED WITH PRODUCT MAY BE HAZARDOUS WASTE.
    DETERMINE WHETHER CONTAMI NATED PRODUCTS ARE HAZARDOUS BEFORE
    DISPOSAL AND DISPOSE OF AS APPROPRIATE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.